1. REMOVE O.E. CALIPER ASSEMBLY TO EXPOSE O.E. BACKING PLATE.

A

B

2. HOLD UP 6-POT CALIPER TO BACKING PLATE. USE A PAIN PEN MARK CLEARANCE CUT LINE.

NOTE: TOP IS APPROXIMATELY 40MM FROM EDGE & BOTTOM IS APPROXIMATELY 41MM FROM EDGE.

A

B

C

D

3. REMOVE BACKING PLATE FROM VEHICLE & CUT ON MARKED LINES. RE-INSTALL BACKING PLATE AND TEST FIT CALIPER. NOTE: DEPENDING ON O.E. TOLERANCES, MORE MAY HAVE TO BE TRIMMED.

A

B

4. AFTER TEST FITTING THE BACKING PLATE, CHECK TO SEE IF THE O.E. HUB CASTING IS TOUCHING THE CALIPER. IF IT IS, MARK CONTACT POINTS AND REMOVE EXCESS CASTING.

A

B

C

D